参考文献

[1]O′HAYRE R，BARNETT D M，PRINZ F B.The triple phase boundary[J].Journal of The Electrochemical Society，2005，152（2）:A439-A444.

[2]YANG X G，ZHANG F Y，LUBAWY A L，et al.Visualization of liquid water transport in a PEFC[J].Electrochemical and Solid-State Letters，2004，7（11）:119-122.

[3]CETINBAS F C，AHLUWALIA R K，KARIUKI N N，et al.Effects of porous carbon morphology，agglomerate structure and relative humidity on local oxygen transport resistance[J].Journal of the Electrochemical Society，2020，167（1）:1-9.

[4]JEON D H，KIM H.Effect of compression on water transport in gas diffusion layer of polymer electrolyte membrane fuel cell using lattice Boltzmann method[J].Journal of Power Sources，2015，294:393-405.

[5]ZHANG F Y，YANG X G，WANG C Y.Liquid water removal from a polymer electrolyte fuel cell[J].Journal of the Electrochemical Society，2006，153（2）:A225-A232.

[6]WU R，LI Y-M，CHEN R，et al.Emergence of droplets from a bundle of tubes into a microchannel gas stream:Application to the two-phase dynamics in the cathode of proton exchange membrane fuel cell[J].International Journal of Heat and Mass Transfer，2014，75:668-684.

[7]COLOSQUI C E，CHEAH M J，KEVREKIDIS I G，et al.Droplet and slug formation in polymer electrolyte membrane fuel cell flow channels:The role of interfacial forces[J].Journal of Power Sources，2011，196（23）:10057-10068.

[8]KUMBUR E C，SHARP K V，MENCH M M.Liquid droplet behavior and instability in a polymer electrolyte fuel cell flow channel[J].Journal of Power Sources，2006，161（1）:333-345.

[9]BHAIYA M，PUTZ A，SECANELL M.Analysis of non-isothermal effects on polymer electrolyte fuel cell electrode assemblies[J].Electrochimica Acta，2014，147:294-309.

[10]XING L，LIU X，ALAJE T，et al.A two-phase flow and non-isothermal agglomerate model for a proton exchange membrane（PEM）fuel cell[J].Energy，2014，73:618-634.

[11]ZHANG G，XIE B，BAO Z，et al.Multi-phase simulation of proton exchange membrane fuel cell with 3D fine mesh flow field[J].International Journal of Energy Research，2018，42（15）:4697-4709.

[12]WANG Y，WANG S，LIU S，et al.Three-dimensional simulation of a PEM fuel cell with experimentally measured through-plane gas effective diffusivity considering Knudsen diffusion and the liquid water effect in porous electrodes[J].Electrochimica Acta，2019，318:770-782.

[13]XING L，CAI Q，LIU X，et al.Anode partial flooding modelling of proton exchange membrane fuel cells:Optimisation of electrode properties and channel geometries[J].Chemical Engineering Science，2016，146:88-103.

[14]MAREK R，STRAUB J.Analysis of the evaporation coefficient and the condensation coefficient of water[J].International Journal of Heat and Mass Transfer，2001，44（1）:39-53.

[15]ZENYUK I V，LAMIBRAC A，ELLER J，et al.Investigating evaporation in gas diffusion layers for fuel cells with X-ray computed tomography[J].The Journal of Physical Chemistry C，2016，120（50）:28701-28711.

[16]WANG Q，LI B，YANG D，et al.Research progress of heat transfer inside proton exchange membrane fuel cells[J].Journal of Power Sources，2021，492:229613.1-229613.19.

[17]DOU M，HOU M，et al.Behaviors of proton exchange membrane fuel cells under oxidant starvation[J].Journal of Power Sources，2011，196（5）:2759-2762.

[18]REISER C A，BREGOLI L，PATTERSON T W，et al.A Reverse-Current decay mechanism for fuel cells[J].Electrochemical and Solid-State Letters，2005，8（6）:A273-A276.

[19]BARGAL M H S，ABDELKAREEM M A A，et al.Liquid cooling techniques in proton exchange membrane fuel cell stacks:A detailed survey[J].Alexandria Engineering Journal，2020，59（2）:635-655.

[20]ZHANG F-Y，SPERNJAK D，PRASAD A K，et al.In situ characterization of the Catalyst Layer in a polymer electrolyte membrane fuel cell[J].Journal of The Electrochemical Society，2007，154（11）:B1152-B1157.

[21]SPRINGER，E T.Polymer Electrolyte Fuel Cell Model[J].1991，138（8）:2334-2342.

[22]WEBER A Z，NEWMAN J.Transport in polymer-electrolyte membranes[J].Journal of The Electrochemical Society，2003，150（7）:A1008-A1015.

[23]ZAWODZINSKI T A，DEROUIN C，RADZINSKI S，et al.Water uptake by and transport through Nation（R）117 membranes[J].1993，140（4）:1041-1047.

[24]WILLIAMS M V，BEGG E，BONVILLE L J，et al.Characterization of gas diffusion layers for PEMFC[J].Journal of the Electrochemical Society，2004，53（16）:5361-5367.

[25]NITTA I，HOTTINEN T，HIMANEN O，et al.Inhomogeneous compression of PEMFC gas diffusion layer Part I.Experimental[J].Journal of Power Sources，2007，171（1）:26-36.

[26]SHETZLINE J A，CREAGER S E.Quantifying electronic and ionic conductivity contributions in carbon/polyelectrolyte composite thin films[J].Journal of the Electrochemical Society，2014，161（14）:H917-H923.

[27]BHAIYA M，PUTZ A，SECANEII M.A comprehensive single-phase，non-isothermal mathematical MEA model and analysis of non-isothermal effects[J].ECS Transactions，2014，64（3）:567-579.

[28]WEBER A Z，NEWMAN J.Coupled thermal and water management in polymer electrolyte fuel cells[J].Journal of The Electrochemical Society，2006，153（12）:A2205-A2214.

[29]BURHEIM T O S.Review:PEMFC materials’thermal conductivity and influence on internal temperature profile[J].ECS Transactions，2017，80（8）:509-525.

[30]BURHEIM O S，PHAROAH J G.A review of the curious case of heat transport in polymer electrolyte fuel cells and the need for more characterisation[J].Current Opinion in Electrochemistry，2017，5（1）:36-42.

[31]WANG S，LI X，WAN Z，et al.Effect of hydrophobic additive on oxygen transport in catalyst layer of proton exchange membrane fuel cells[J].Journal of Power Sources，2018，379: 338-343.

[32]BOCK R，KAROLIUSSEN H，SELAND F，et al.Measuring the thermal conductivity of membrane and porous transport layer in proton and anion exchange membrane water electrolyzers for temperature distribution modeling[J].International Journal of Hydrogen Energy，2020，45（2）:1236-1254.

[33]OTSUKI Y，SHIGEMASA K，ARAKI T.Measurement of temperature difference on catalyst layer surface under rib and channel in PEFC using micro sensors[J].International Journal of Heat and Mass Transfer，2020，160（3）:120169.1-120169.8.

[34]NISHIMURA A.In-situ measurement of in-plane temperature distribution in a single-cell polymer electrolyte fuel cell using thermograph[J].Journal of Environment and Engineering，2011，6（1）:1-16.

[35]BOCK R，KAROLIUSSEN H，POLLET B G，et al.The influence of graphitization on the thermal conductivity of catalyst layers and temperature gradients in proton exchange membrane fuel cells[J].International Journal of Hydrogen Energy，2020，45（2）:1335-1342.

[36]BURHEIM O S，SU H，HAUGE H H，et al.Study of thermal conductivity of PEM fuel cell catalyst layers[J].International Journal of Hydrogen Energy，2014，39（17）:9397-9408.

[37]MPL，BURHEIM O S，SU H，et al.Thermal conductivity and temperature profiles of the micro porous layers used for the polymer electrolyte membrane fuel cell[J].International Journal of Hydrogen Energy，2013，38（20）:8437-8447.

[38]ZAMEL N，LITOVSKY E，et al.Measurement of the through-plane thermal conductivity of carbon paper diffusion media for the temperature range from-50 to+120℃[J].International Journal of Hydrogen Energy，2011，36（19）:12618-12625.

[39]AHADI M，ANDISHEH-TADBIR M，TAM M，et al.An improved transient plane source method for measuring thermal conductivity of thin films: Deconvoluting thermal contact resistance[J].International Journal of Heat and Mass Transfer，2016，96:371-380.

[40]AHADI M，TAM M，SAHA M S，et al.Thermal conductivity of catalyst layer of polymer electrolyte membrane fuel cells: Part 1-Experimental study[J].Journal of Power Sources，2017，354:207-214.

[41]XU G，LAMANNA J M，CLEMENT J T，et al.Direct measurement of through-plane thermal conductivity of partially saturated fuel cell diffusion media[J].Journal of Power Sources，2014，256（15）:212-219.

[42]CHEN L，WANG Y F，TAO W Q.Experimental study on the effect of temperature and water content on the thermal conductivity of gas diffusion layers in proton exchange membrane fuel cell[J].Thermal Science and Engineering Progress，2020，19:100616.1-100616.4.

[43]KHANDELWAL M，MENCH M M.Direct measurement of through-plane thermal conductivity and contact resistance in fuel cell materials[J].Journal of Power Sources，2006，161（2）:1106-1115.

[44]BURHEIM O S，PHAROAH J G，et al.Through-plane thermal conductivity of PEMFC porous transport layers[J].Journal of Fuel Cell Science and Technology，2011，8（2）: 021013.1-021013.11.

[45]SADEGHI E，DJILALI N，et al.Effective thermal conductivity and thermal contact resistance of gas diffusion layers in proton exchange membrane fuel cells.Part 1:Effect of compressive load[J].Journal of Power Sources，2011，196（1）:246-254.

[46]WANG Y，GUNDEVIA M.Measurement of thermal conductivity and heat pipe effect in hydrophilic and hydrophobic carbon papers[J].International Journal of Heat and Mass Transfer，2013，60:134-142.

[47]NITTA I，HIMANEN O，MIKKOLA M.Thermal conductivity and contact resistance of compressed gas diffusion layer of PEM fuel cell[J].Fuel Cells，2008，8（2）:111-119.

[48]ALHAZMI N，INGHAM D B，ISMAIL M S，et al.The through-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly and gas diffusion layer in proton exchange membrane fuel cells[J].Journal of Power Sources，2014，270:59-67.

[49]SADEGHIFAR H，DJILALI N，BAHRAMI M.Effect of polytetrafluoroethylene（PTFE）and micro porous layer（MPL）on thermal conductivity of fuel cell gas diffusion layers:Modeling and experiments[J].Journal of Power Sources，2014，248:632-641.

[50]BURHEIM O，VIE P J S，PHAROAH J G，et al.Ex situ measurements of through-plane thermal conductivities in a polymer electrolyte fuel cell[J].Journal of Power Sources，2010，195（1）:249-256.

[51]KARIMI G，LI X，TEERTSTRA P.Measurement of through-plane effective thermal conduc tivity and contact resistance in PEM fuel cell diffusion media[J].Electrochimica Acta，2010，55（5）:1619-1625.

[52]MPL，UNSWORTH G，ZAMEL N，et al.Through-plane thermal conductivity of the microporous layer in a polymer electrolyte membrane fuel cell[J].International Journal of Hydrogen Energy，2012，37（6）:5161-5169.

[53]ZAMEL N，LITOVSKY E，SHAKHSHIR S，et al.Measurement of in-plane thermal conductivity of carbon paper diffusion media in the temperature range of-20℃to+120℃[J].Applied Energy，2011，88（9）:3042-3050.

[54]TEERTSTRA P，KARIMI G，LI X.Measurement of in-plane effective thermal conductivity in PEM fuel cell diffusion media[J].Electrochimica Acta，2011，56（3）:1670-1675.

[55]ALHAZMI N，ISMAIL M S，INGHAM D B，et al.The in-plane thermal conductivity and the contact resistance of the components of the membrane electrode assembly in proton exchange membrane fuel cells[J].Journal of Power Sources，2013，241:136-145.

[56]GE N，CHEVALIER S，LEE J，et al.Non-isothermal two-phase transport in a polymer electro-lyte membrane fuel cell with crack-free microporous layers[J].International Journal of Heat and Mass Transfer，2017，107:418-431.

[57]RAHGOSHAY S M，RANJBAR A A，RAMIAR A，et al.Thermal investigation of a PEM fuel cell with cooling flow field[J].Energy，2017，134:61-73.

[58]WU H，BERG P，et al.Non-isothermal transient modeling of water transport in PEM fuel cells[J].Journal of Power Sources，2007，165（1）:232-243.

[59]WU H，et al.Modeling of PEMFC transients with finite-rate phase-transfer processes[J].Journal of The Electrochemical Society，2010，157（1）:B1-B12.

[60]GOSHTASBIA.A real-time pseudo-2d bi-domain model of pem fuel cells for automotive applications[C].New York:ASME，2017.

[61]LEE S K.Temperature Measurement in Through-plane Direction in PEFC with a Fabricated Inline Thermocouple and Supporter[J].ECS Transaction，2009，25（1）:495-503.

[62]LEE S K，ITO K，OHSHIMA T，et al.In situ measurement of temperature distribution across a proton exchange membrane fuel cell[J].Electrochemical and Solid-State Letters，2009，12（9）:B126-B130.

[63]ZHANG G，GUO L，MA L，et al.Simultaneous measurement of current and temperature distributions in a proton exchange membrane fuel cell[J].Journal of Power Sources，2010，195（11）:3597-3604.

[64]ZHANG G，SHEN S，GUO L，et al.Dynamic characteristics of local current densities and temperatures in proton exchange membrane fuel cells during reactant starvations[J].International Journal of Hydrogen Energy，2012，37（2）:1884-1892.

[65]TANG Y Q，FANG W Z，LIN H，et al.Thin film thermocouple fabrication and its application for real-time temperature measurement inside PEMFC[J].International Journal of Heat and Mass Transfer，2019，141:1152-1158.

[66]LIU J X，GUO H，YUAN X M，et al.Effect of mode switching on the temperature and heat flux in a unitized regenerative fuel cell[J].International Journal of Hydrogen Energy，2019，44（30）:15926-15932.

[67]ALI S T，LEBAEK J，NIELSEN L P et al.Thin film thermocouples for in situ membrane electrode assembly temperature measurements in a polybenzimidazole-based high temperature proton exchange membrane unit cell[J].Journal of Power Sources，2010，195（15）:4835-4841.

[68]THOMAS A，MARANZANA G，DIDIERJEAN S，et al.Study of coupled heat and water trans fer in proton exchange membrane fuel cells by the way of internal measurements[J].Journal of Physics:Conference Series，2012，395（1）:012065.1-012065.8.

[69]KREITMEIER S.Local Degradation at Membrane Defects in Polymer Electrolyte Fuel Cells[J].Journal of the Electrochemical Society，2013，160（4）:F456-F463.

[70]NISHIMURA A，KAMIYA S，OKADO T，et al.Heat and mass transfer analysis in single cell of PEFC using different PEM and GDL at higher temperature[J].International Journal of Hydrogen Energy，2019，44（56）:29631-29640.

[71]KONGKANAND A，MATHIAS M F.The priority and challenge of high-power performance of low-platinum proton-exchange membrane fuel cells[J].The Journal of Physical Chemistry Letters，2016，7（7）:1127-1137.

[72]KUDO K，JINNOUCHI R，MORIMOTO Y.Humidity and temperature dependences of oxygen transport resistance of nafion thin film on platinum electrode[J].Electrochimica Acta，2016，209:682-690.

[73]LIU S，YUAN S，LIANG Y，et al.Engineering the catalyst layers towards enhanced local oxygen transport of Low-Pt proton exchange membrane fuel cells: Materials，designs，and methods[J].International Journal of Hydrogen Energy，2023，48（11）:4389-4417.

[74]YAN W M，YANG C H，SOONG C Y，et al.Experimental studies on optimal operating conditions for different flow field designs of PEM fuel cells[J].Journal of Power Sources，2006，160（1）:284-292.

[75]YAN W M，CHEN C Y，MEI S C.Effects of operating conditions on cell performance of PEM fuel cells with conventional or interdigitated flow field[J].Journal of Power Sources，2006，162（2）:1157-1164.

[76]GE S H，YI B L.A mathematical model for PEMFC in different flow modes[J].Journal of Power Sources，2003，124（1）:1-11.

[77]SCHOLTA J，HAUSSLER F，ZHANG W.Development of a stack having an optimized flow field structure with low cross transport effects[J].Journal of Power Sources，2006，155（1）:60-65.

[78]MORIN A，XU F，GEBEL G，et al.Influence of PEMFC gas flow configuration on performance and water distribution studied by SANS:Evidence of the effect of gravity[J].Fuel and Energy Abstracts，2011，36（4）:3096-3109.

[79]VALIO L，MUSTATA R，GIL M I，et al.Effect of the relative position of oxygen-hydrogen plate channels and inlets on a PEMFC[J].International Journal of Hydrogen Energy，2010，35（20）:11425-11436.

[80]KUMAR A，REDDY R G.Effect of channel dimensions and shape in the flow-field distributor on the performance of polymer electrolyte membrane fuel cells[J].Journal of Power Sources.2003，113（1）:11-18.

[81]AHMED D H，SUNG H J .Effects of channel geometrical configuration and shoulder width on PEMFC performance at high current density[J].Journal of Power Sources.2006，162（1）:327-339.

[82]YAN W M，LI H Y，CHIU P C，et al.Effects of serpentine flow field with outlet channel contraction on cell performance of proton exchange membrane fuel cells[J].Journal of Power Sources.2008，178（1）:174-180.

[83]CHOI K S，KIM H M，MOON S M.Numerical studies on the geometrical characterization of serpentine flow-field for efficient PEMFC[J].International Journal of Hydrogen Energy，2011，36（2）:1613-1627.

[84]KUO J K，YEN T H，CHEN C K.Three-dimensional numerical analysis of PEM fuel cells with straight and wave-like gas flow fields channels[J].Journal of Power Sources，2008，177（1）:96-103.

[85]BUNMARK N，LIMTRAKUL R，FOWLER R W，et al.Assisted water management in a PEMFC with a modified flow field and its effect on performance[J].International Journal of Hydrogen Energy，2010，35（13）:6887-6896.

[86]ROSHANDEL R，ARBABI F，MOGHADDAM G K.Simulation of an innovative flow-field design based on a bio inspired pattern for PEM fuel cells[J].Renewable Energy，2012，41（2）:86-95.

[87]KHAZAEE I，GHAZIKHANI M.Performance improvement of proton exchange membrane fuel cell by using annular shaped geometry[J].Journal of Power Sources，2011，196（5）:2661-2668.

[88]KHAZAEE I，GHAZIKHANI M，ESFAHANI M N.Effect of gas diffusion layer and membrane properties in an annular proton exchange membrane fuel cell[J].Applied Surface Science，2012，258（6）:2141-2148.

[89]CANO-ANDRADE S，HERNANDEZ-GUERRERO A，SPAKOVSKY M，et al.Current density and polarization curves for radial flow field patterns applied to PEMFCs（Proton Exchange Membrane Fuel Cells）[J].Energy，2010，35（2）:920-927. 3/Iw3DQIuIlD72sg2Y98eRgTSWJtWPZh1Qn3thHmDljIhO7uxDuYMN86sVa3mlij