Foreword

This code is prepared by China Petroleum and Chemical Engineering Survey and Design Association and Shanghai Fuchen Chemical Co.，Ltd.together with other involved organizations.according to the requirements of Document JIANBIAO ［2013］No.6 issued by the Ministry of Housing and Urban-Rural Development（MOHURD）" Notice on Printing and Distributing ' the Development and Revision Plan of National Engineering Construction Standards in 2013 '".

In preparing this code，the development team carried out investigation and research，tests and verification，summarized the application experience of Chinese fibre reinforced plastics equipment and piping engineering technology，made reference to the advanced codes and standards in China and abroad，based on extensive consultation，reviewed and finalized this code.

This code consists of 11 chapters and 11 appendixes，covering:general provisions，terms， basic requirements， materials， equipment design，piping design，manufacture， quality control and inspection，marking，packing，transporting，storing，installation，project acceptance.

The provisions printed in bold type are mandatory ones and must be implemented strictly.

This code is under the jurisdiction of，and its mandatory provisions are interpreted by the Ministry of Housing and Urban-Rural Development of the People's Republic of China.The Branch of Chemical Industry，China Association for Engineering Construction Standardization is responsible for its routine management，and Shanghai Fuchen Chemical Co.， Ltd.is in charge of explanation of technical specification.During the implementation of this code，any comments and advices can be posted or passed on to Shanghai Fuchen Chemical Co.， Ltd.（Address:5-21B， No.251 Caoxi Road，Xuhui District， Shanghai；Postcode:200235）.

Chief Development Organizations， Co-Development Organizations，Participating Organizations，Chief Draffters，Chief Reviewers and Chief Translaters of this code:

Chief Development Organizations:

China Petroleum and Chemical Engineering Survey and Design Association

Shanghai Fuchen Chemical Co.，Ltd.

Co-Development Organizations:

Shijiazhuang Development Zone Jiyuan Technology Co.，Ltd.

Xinjiang Pengyuan New Material Co.，Ltd.

East China University of Science and Technology

China Wuhuan Engineering Co.，Ltd.

Sinopec Nanjing Engineering Co.，Ltd.

China Enfi Engineering Technology Co.，Ltd.

Jizhou Zhongyi Composite Material Co.，Ltd.

Jiangxi Copper Group Company Guixi Smelting Plant

Changzhou Huake Polymer Co.，Ltd.

Jinchuan Group Engineering Construction Co.，Ltd.

Jilin Design Institute of CNPC Northeast Refining and Chemical Engineering Co.，Ltd.

Ashland（China）Investment Co.，Ltd.

China Power Engineering Consulting Group East China Power Design Institute Co.，Ltd.

China Metallurgical Orient Engineering Technology Co.，Ltd.

Hebei Hengxing Environmental Protection Equipment Engineering Co.，Ltd.

National Chemical Construction Standardization Management Center

Participating Organizations:

Taishan Fibreglass Co.，Ltd.

Chongqing International Composite Materials Co.，Ltd.

Guangdong Xianli Fibre Reinforced Plastic Co.，Ltd.

Deyang Shuangquan FRP Products Co.，Ltd.

Chief Drafters:

LU Shiping　LI Guoshu　WANG Lei　HOU Ruigang　TANG Wenyong

WANGZhengzhu　YUQun　ZHAOAijun　LANLiqin　LIUSu

JIANGXianlong　LUYuechi　WANG Tiantang　ZENG Shao　JU Yuanqin

JIANG Guoxian　ZHANG Weixiu　YUAN Ye　LAI Xiaodong　LI Dasheng

NIU Chunliang　GUO Quanguo　LU Tian　ZHAO Guiqin　GAO Shangwen

LI Ye

Chief Reviewers:

CHEN Bo　NI Lizhong　ZHU Sirong　GUO Wenqiang　SHA Yuan

ZHANG Shiguang　WANG Qianghua　ZHANG Linwen　LV Huimin

WANG Jiandong　JI Li

Chief Translaters:

ZHU Sirong　LU Qi'ao　LI Guoshu　WANG Lei　LU Shiping